22-Map 2.5 Bar Surface Mount

This 2.5Bar MAP Sensor is the preferred external sensor for general purpose sales. It is soldered onto wires and housed in a plastic enclosure. It can measure up to 1.5 Bar boost pressure from turbos. It is suitable for normal aspirated engines because the operating range can be adjusted in the software. Note however that for normal aspirated engines the 1.1Bar sensor will be slightly more accurate due to the larger Signal Range in lower pressure.

If you want to use it as an Altitude sensor then the Map/Alt Swop in the software must be selected. In this case the Map sensor will then be moved to the Internal Sensor.

The Enclosure must have a hole in the top connect the sensor with a silicone hose to the intake manifold. It may also be used for an Altitude sensor in which case it does not have to be connected to a hose.

If you want to use it as a MAP sensor then the Map/Alt Swop in the software must be selected. In this case the Altitude will then be moved to the External Map.

Power Supply                       5 Volt

Pressure range                     20 to 250 kPa

Signal Range                        0.204V to 4.896V

Operating Temperature      0 to 85°C

Part Number                         22

Photo’s and Video links will be posted under this tab